DeLaval Silicone Milking Liners DL009U Durable Milking Inflations For Cow
1.Material: silicone rubber
2.Length: 310mm
3.Diameter of two ends: 20mm&14mm
New Milking Machine Liners/Inflations DL009U 1.Material: silicone rubber 2.Length: 310mm 3.Diameter of two ends: 20mm&14mm
Milk Liners For DeLaval Harmony Clusters
The main reason to switch to the silicone inflation is cow comfort! after a week of their use you will already notice many cows no longer hesitate entering the milking area!
After several weeks most farms start to notice a change for the better in the teat end condition, the action of the inflation is more of a surrounding pressure on the teat end as opposed to a crushing action created by the closing action of a typical round or even a typical triangular inflation.
The least important aspect to those who care about their cows and health is the fact the inflations will last a minimum of 6,000 ICM while many farms currently will change the inflations around 8,000 to 12,000 ICM. Those farms going the longer ICM will generally change just the milk tubes 1/2 way through the life cycle
The Silicone inflation comes as a set of 4 (ea) inflations complete with shells inflations vented nipples air and milk tubes. There are 2 different milk tubes available which are of different hardness depending on the style of claw you are using. The sets also come with either a 1/4" ID or a 9/32" ID air tube. Air vents are located in the plastic nipple between the shell and the milk tube for quickly evacuating the milk from the inflation to the claw.
Both jetter cups and manifold cups are available for in/place washing for most systems.
Pricing is important but performance and longevity (outstanding teat ends, good milking speed and 6,000 to 13,000 ICM's) should be foremost on the dairyman's mind!
